Finding a reliable, cost efficient, effective cleaning service in Surrey and White Rock, South Surrey, BC can be a real task. It is critical to maintain a clean and healthy working environment with minimal disruption to your business. It is a proven fact that a clean, fresh and healthy environment can enhance productivity of employees and your … Read more
Post construction cleaning abbotsford chilliwack langley
Looking for a quote? Contact us info@cbfcanada.com, call 604-375-7895 or simply fill out the form below and we will contact you:
[contact-form-7 id=”14414″ title=”Contact form 1″]
What exactly is post Construction Cleaning?
Post construction cleaning involves what general commercial office janitorial service doesn’t. Finding a company that does a thorough job in Langley, Abbotsford or Chilliwack, BC is rare. It has been a constant practice of general cleaning companies to take on renovation cleaning jobs which may end up in a disaster especially in cities like Vancouver, West Vancouver, North Vancouver, Burnaby and Richmond where the cleaning companies are so busy day in and day out. Our proper employee training procedures ensure that any renovation project we put our hands on is properly followed through. Cleaning exterior windows, interior windows with proper tools, taking care of the baseboards, walls, dust without without HEPA filters, doors, door handles, kitchen, steel are some of the major tasks to complete. After all your brand new project needs to look new. Are you near the end of a big Construction project and starting to think about all the cleaning you’re going to have to do?
Well Worry No More, We Have You Covered!
Here at CBF Management, we take the utmost care to ensure that every corner of your new space is clean, safe and ready for you. We usually follow a standard operating procedure, however we can customize our post construction cleaning service to accommodate the needs of our General Contractors. This Is How We Do It:
Phase 1. Rough Clean: During this initial phase we remove and clean all construction debris including dust, caulking, paint overspray, marks and adhesives. Windows, sliding glass doors and glass partitions are all thoroughly cleaned. Typically, frames and mullions are included during this cleaning phase as well.
Phase 2. Final Clean: This phase begins with a repeat the all glass cleaning followed by an in-depth cleaning of all interior surfaces. At the completion of this phase the space is usually considered move-in ready. Each cabinet will be cleaned inside and out with a microfiber rag and a neutral cleaner and the tops will be vacuumed to remove any accumulated dust or debris. All bathrooms are cleaned from top to bottom including floors, fixtures, tubs, showers, counters, mirrors and any wall tile. Every baseboard and floor is detailed with the utmost care. We take every type
of flooring into consideration when we choose a cleaning medium to ensure that no damage is caused. After this phase we recommend using HEPA fiters.
3. Touch-Up Clean: A week or so after the dust settles, we go back in and wipe down all horizontal surfaces to assure that all dust and debris is taken care of. We also remove any smudgesand fingerprints that have accumulated on glass surfaces. These 3 phases will settle all your worries and assure that your newly constructed space is move-in ready. We make sure to keep you in the loop every step of the way so that your needs and expectations are met. We look forward to helping you put the finishing touches on your next service!
Call Us Today from anywhere West Vancouver, Surrey, Langley, Burnaby, Coquitlam, Maple Ridge, Mission, Abbotsford to Chilliwack to set up your Free Estimate 604-375-7895 or email us at info@cbfcanada.com. For a complete list of our post construction cleaning services we offer visit https://www.cbfcanada.com
Grout is a porous material that builders use to fill the spaces or cracks between the tiles. It creates a smooth solid floor, wall, or backsplash and makes the tile pop. The most common type of grout is cement grout. It is made from a mix that includes water, cement and sometimes sand.
Is bleach bad for tile grout?
Grout is porous so it absorbs the bleach down to your subflooring, baseboards where it can do even more damage and cannot be rinsed away.
We recommend not clean with chlorine bleach because it is toxic and pollutes indoor air. You should not use bleach when cleaning grout and tile because bleach is a base with a pH of around 12 meaning it is a highly alkaline substance which can cause severe burns or injuries. Because of its high pH bleach can be corrosive and slowly destroy the materials it touches including grout and tile finishes.
How to clean grout?
The secret to clean looking tile floors, walls and counters? Clean grout. Tile resists dirt and stains but grout is porous and absorbs dirt and spills, so it stains easily. In an entry, dirt and grime stains the grout. In a kitchen, spills are to blame for dirty grout. Soap, mold and mildew make dirty grout in a bathroom. Here’s how to clean grout in any part of your facility:
Custom grout cleaning CBF Management
First, wipe down the grout with hot water to remove surface dirt and grime. Next, spray a cleaning solution on the grout. You can mix your own by putting a 50-50 mix of vinegar and water into a spray bottle. Spray on the grout, let stand for five minutes and then scrub with a soft brush. Use a toothbrush or other small scrub brush to scrub the grout. For extra scrubbing power, use an electric toothbrush. Don’t use a metal brush as it will scratch the tile and could knock out pieces of the grout. Rinse thoroughly with hot water when you’re done.
You can also use commercially prepared grout cleaners. Follow the manufacturer’s instructions on how to clean floor grout. Use these caustic products sparingly, because regular use will erode the grout.
For stubborn grout stains, mix a paste of two parts baking soda and one part water. Apply it to the stain, let it sit overnight and then scrub with a nylon brush. Rinse thoroughly with hot water when you’re done.
If you have coarse or porous tile like marble, use a less acidic solution because vinegar can stain the tile. Try mixing one part peroxide to two parts baking soda and scrub the grout with a soft brush. Knowing how to clean stained grout in stone tile will keep you from damaging your floor.
You can also use sandpaper to remove stains from grout. Fold the sandpaper and work the creased edge back and forth along the grout line. You can also use a pencil top eraser. Rub it back and forth across the stained grout line. Rinse thoroughly with hot water when you’re done.
Once you are done cleaning, let the grout air dry, for 24 hours, then put on a silicone based grout sealer to resist future stains and dirt. You’ll need to reapply the sealer every two years, or more frequently if the grout is in a hightraffic area.
Knowing how to clean dirty grout improves the look and extends the life of your tile. Should you require larger are commercial, retail or office grout cleaned, CBF Management’s experienced staff is at your disposal. We provide service in West Vancouver, North Vancouver, Vancouver, Burnaby, Coquitlam, Port Coquitlam, Mission, Maple Ridge, New Westminster, Surrey, Langley, Abbotsford, Chilliwack. For all janitorial service needs, office cleaning, post construction cleaning, retail, showroom and window cleaning, we can book an online appointment. Visit https://www.cbfcanada.com for a quick quote or call us at 1-604-375-7895.
At CBF Management, we are experts in all areas of floor care including cleaning, stripping and polishing, burnishing, buffing and maintenance for enhancing the life of your floors. Our hard floor care polish teams have decades of experience, and all our workmanship is guaranteed and complies with the floor care industry.
cbf management floor burnishing surrey vancouver langley abbotsford chilliwack maple ridge mission burnaby coquitlam www.cbfcanada.com showroom cleaning service car dealership window cleaning
Vinyl Stripping and Polishing
Keeping your hard floor areas well maintained increases the durability and the life of your floors. This also makes them easier to clean and prevents slippery dangerous floors.
Although vinyl floors can be extremely durable, they need proper maintenance to preserve their resilience and shine. Without proper maintenance, vinyl floors lose their shine, develop wax build-up, yellow discoloration, scratches, abrasions and ultimately act like a magnet attracting dirt.
Regular Floor Maintenance Programmes
We provide stripping, sealing and waxing services to restore the look of your floors. Ask about our regular maintenance programmes including high speed burnishing and periodic scrubbing and re-coating, to maintain your floors in top condition all year round.
Floor safety and maintenance is highly recommended by CBF Management.
